Post your Welding Cart Designs Here!

Tuesday, June 04 2013, 08:11 AM
If you are submitting a design for the Summer Welding Contest, submit your Welding Cart designs here as replies.

The earlier the better - The longer your design is up, the more people will see it and can vote for it.

Contest ends Labor Day 2013.

For more details, visit the free welding stuff contest thread.
Check out the new Weld Settings Calculator

Review your machines in Weld.com's Apples to Apples Product Comparison / Review Section.
Responses (10)
  • Accepted Answer

    Tuesday, June 04 2013, 10:49 AM - #permalink
    Here is my welding cart idea. I wanted to put a drawer underneath the slide out table too, but couldn't draw it well in the image.
    • pizzawelder
      more than a month ago
      Thanks for the likes guys! Help me win!! :)
    • spgirard30
      more than a month ago
      Good Luck!
    ----------------------------------------------------------------------------------------------------------

    Everlast PowerTIG 200DX


    I eatsa Lotsa Pizza!

    Sometimes I've been know to throw down some metal too.
    The reply is currently minimized Show
  • Accepted Answer

    Thursday, June 06 2013, 11:25 AM - #permalink
    Ok, so for a first draft kind of thing...

    No laughing now....

    Room for a multi process on top with the plasma on the next shelf down. The bottom shelf is either the water cooler for the tig or a mini fridge with a beer tap.

    Not shown is the 32 inch flat screen with sat link. XM radio and wifi of course. If I can figure out how to mount the hammock I will post those plans later.... (kidding about the hammock)
    Attachments:
    From the desk of Kevin Caron, where the answers are stranger than the questions!

    AHP Alpha Tig 200x Longevity ProMts 200 Everlast PowerTig 255EXT
    Miller Syncrowave 200 Millermatic 251
    www.kevincaron.com
    The reply is currently minimized Show
  • Accepted Answer

    Wednesday, June 12 2013, 12:23 PM - #permalink
    I find it hard to believe that only two designs have been posted!

    A little dreaming on your part will get you a custom built welding cart to fit your needs by the good guys at Weld.com.

    Come on guys ' post something up!!!
    From the desk of Kevin Caron, where the answers are stranger than the questions!

    AHP Alpha Tig 200x Longevity ProMts 200 Everlast PowerTig 255EXT
    Miller Syncrowave 200 Millermatic 251
    www.kevincaron.com
    The reply is currently minimized Show
  • Accepted Answer

    Monday, June 17 2013, 02:48 PM - #permalink
    Ok, I may have stole some ideas from existing carts out there... But here she is!
    Attachments:
    Lincoln Plasma 20
    The reply is currently minimized Show
  • Accepted Answer

    Monday, June 17 2013, 05:10 PM - #permalink
    Can we post more than one cart design??
    Lincoln Plasma 20
    The reply is currently minimized Show
  • Accepted Answer

    Monday, June 17 2013, 11:12 PM - #permalink
    Yes, you can post as many designs as you want.
    From the desk of Kevin Caron, where the answers are stranger than the questions!

    AHP Alpha Tig 200x Longevity ProMts 200 Everlast PowerTig 255EXT
    Miller Syncrowave 200 Millermatic 251
    www.kevincaron.com
    The reply is currently minimized Show
  • Accepted Answer

    Wednesday, June 26 2013, 07:57 AM - #permalink
    I know I didn't design this, but I saw a picture of it and it is so bad ass I had to post it.
    A good welder can do it in ALL positions.
    The reply is currently minimized Show
  • Accepted Answer

    Tuesday, July 09 2013, 04:28 AM - #permalink
    alright time to submit my cart design, I have been on vacation for the last month and now I am finally back at work and had time to figure out how to use the google sketch program. This was my first time really drawing anything with CAD.


    The top surface is 34"x24" and 38" tall, drawers are 6 inches deep and 18 inches wide. expanded metal on the bottom and a couple 2 inch tall rings to keep the bottles from shifting. some heavy duty swivel casters up front and some heavy duty pneumatic tires out back. I couldnt figure out how to make a push bar up front but I would add that and then some hooks out back and on the side to handle the cord management issue.

    This would hold my millermatic 211, miller dynasty 200dx and ESAB plasma cutter.

    I played around with it a bit more

    http://s853.photobucket.com/user/shaungirard/media/WELDCART_zps026e5365.jpg.html" target="_blank">http://i853.photobucket.com/albums/ab94/shaungirard/WELDCART_zps026e5365.jpg

    http://i853.photobucket.com/albums/ab94/shaungirard/WELDCARTback_zps37741abf.jpg
    Miller Dynasty 200DX, Millermatic 211, ESAB PCM 875
    The reply is currently minimized Show
  • Accepted Answer

    Wednesday, July 31 2013, 09:12 AM - #permalink
    I am looking into purchasing my first welding machine, so I will need a cart! Here is a little something I created with the help of some stuff already out there.

    Vote for me!! :D :D
    Attachments:
    Just got me my first welding machine...

    Longevity ProMTS 200:

    MIG 
    TIG 
    Stick 
    The reply is currently minimized Show
  • Accepted Answer

    Tuesday, August 27 2013, 02:42 PM - #permalink
    I call mine RAPTOR! Mig one one side and Tig on the other!! Up Up and Away!!!
    Attachments:
    Weld On!
    The reply is currently minimized Show
Your Reply
Board Statistics