B15 Elektra Beveler

$1,595.00
In stock
SKU
25251
30° spare head with 6 screws,
6 carbide inserts, screw for impeller and impeller 27223
37,5°spare head with 6 screws, 6 carbide inserts, screw for impeller and impeller 27227
45°spare head with 6 screws,
6 carbide inserts, screw for impeller and impeller 27222
50° spare head with 6 screws,
6 carbide inserts, screw for impeller and impeller 27224
60° spare head with 6 screws,
6 carbide inserts, screw for impeller and impeller 27240
Radius R 3,5mm spare head with with 3 screws, 3 carbide inserts, screw for impeller and impeller 27233
Radius R 2,5mm spare head with with 3 screws, 3 carbide inserts, screw for impeller and impeller 27234
Non standard angle of spare head with 6 screws, 6 carbide inserts, screw for impeller and impeller 27xxx
Coated inserts four edges /10pcs - 1 package/ 27231
Inserts radius R3,5mm /10pcs - 1 package/ 26110
Inserts radius R2,5mm /10pcs - 1 package/ 26109
Inserts radius R4mm /10pcs - 1 package/ 26111

Powerful Beveler B15 ELECTRA (max. width of bevel 0,6" / 15mm) with High Performance Motor and Gearbox Fein Power Tools

  • The beveler B15 ELECTRA is a most powerful, heavy-duty hand held electric beveler which uses 6 indexable carbide inserts. The design allows straight edges, contours and cutouts to be beveled with ease.
  • Works with steel, aluminium, copper, plastic and other materials.
  • The precision dial scale allows precise adjustment of the chamfer height.
  • Replacable the tool holder for angle 30°, 37,5°, 45°, 50°, 60° other angles on demand.
  • High performance motor made by FEIN POWER TOOLS - high removal rate over the entire operating range with loading up to 150%.
  • Low gear head design for tight areas.
  • Soft-start for safe handling.
  • Rear handle can be rotated through 4 positions.
  • Dustproof ball bearing.
  • Sealed electronic components.
  • Carbon brushes with automatic switch-off function.
  • Self-start lock
Write Your Own Review
You're reviewing:B15 Elektra Beveler
Beveler B15 ELECTRA
Needed tools for operation
1 operation manual
WITHOUT HEAD! Select the desired head angle
Power input: 2000 W (2500 W)
(POWER FULL Motor made by FEIN TOOLS GERMANY for NKO MACHINES)
About FEIN POWER TOOLS
Voltage: 110V/50Hz (230 V/ 50 Hz)
No Load r.p.m.: 6600 RPM
Bevel width: 0-0,6" / 0 - 15 mm < 58 015 PSI / 400 N/mm2; 0 - 0,3," / 0 to 8mm > 58 015 PSI / 400 N/mm2
Net Weight: aprox. 20,9 lbs / 9,5 kg
Bevel angle: optional 30°, 37,5°, 45°, 50°, 60°, other angles on demand

Bevelling of holes – minimal dimensions
Bevel angle α° Minimal diameter of the hole in mm
30° Ø 34mm
37,5° Ø 28mm
45° Ø 28mm
50° Ø 28mm
60° Ø 27mm
R 2,5mm Ø 41mm
R 3,5/4mm Ø 40mm