EVERY FABRICATORS BEST FRIEND | PLATE DOG AND WEDGEOne day while I was trying to physically force a sheet of 1/4" plate down so I could weld it in place..
CAN YOU REALLY READ A TAPE MEASURE?Included in this link is a tape measure test, go ahead and take the test and see how well you do.
9 SHOP TOOLS WE ALWAYS GET QUESTIONS ABOUTOver the past few months we have received a ton of questions regarding some of tools we use frequently on the channel.
SILICON BRONZE THE FEET ON YOUR CLAMPSIf you have ever worked with polished stainless steel, you know that it is very easy to scratch the polished surface.
A SPEED SQUARE HACK FOR EVERY WELDERWhen I first got into ironworking, I started in the fab shop making columns, baseplates, beams etc.
RECLAIMING YOUR OLD C-CLAMPSToday we are building what's commonly referred to as a half clamp in the field.
GRINDING WITH WEILER ABRASIVESWhile attending Fabtech 2019 we were able to meet up with the fine folks at Weiler Abrasives...
A WORKPIECE CLAMP THAT ALLOWS YOU TO GROUND TO ANYTHINGBack when I did Ironwork, we did a lot of work at Disney.