Power i-MIG 140E

140 amp MIG welder
Special Price $359.10 Regular Price $399.00
In stock
The economy line of inverter MIG welders from Everlast is not short on performance or capability.  The all new Power i-MIG 140E is a 120V powerhouse.  The IGBT inverter design puts out a higher amp output with a better duty cycle when compared to transformer based MIG welders.  Compare the Power i-MIG 140E to the competition.  The competition features a transformer 140 amp MIG welder which typically has a 20% duty cycle at 90 amps, and a far less duty cycle at a maximum amps which is almost never published.   The new Everlast Power i-MIG 140E comes with a 25% duty cycle at the rated maximum output of 140 Amps.  And it can do it while operating more efficiently, at a lower amp draw. To complete the comparison, it is also lighter in weight and offers a smaller foot print without reducing the maximum diameter wire roll size (8").    Its size and weight allows you to pick up the unit and carry it right to where you need it without requiring a follow up visit to your chiropractor.  
Write Your Own Review
You're reviewing:Power i-MIG 140E
Inverter based design lowers weight and power consumption while increasing duty cycle, and arc performance
Stepless control of both the wire speed and voltage. No tapped settings
Basic, familiar design allows easy transfer of operator skills
Durable IGBT components offer longer life
Stable, smooth arc with good wet in charachteristics
120V input design allows the unit to be used almost anywhere
Sturdy drive mechanism is designed for years of use
Standard drive rolls can feed .023"-.030" Wire diameter
Designed to be used with both 4" and 8" Wire Spools
10 Ft. (3m) 15 Series MIG gun
Work clamp
Ar/CO2 Regulator
Consumable start kit
Analog IGBT Inverter
Output /Process Type:
Max Rated MIG Amps:
MIG Amps/Volts @ Rated Duty Cycle:
140A/21V @ 25% Duty Cycle/40º C
90A/18.4V @ 60% Duty Cycle/40º C
70A/17.5V @ 100% Duty Cycle/40º C

Max Inrush ( I1MAX ) Amps:
Maximum Rated (I1EFF ) Input Amps:
MIG Output Range:
Variable MIG Inductance/Stick Arc Force Control:
Spool Gun Capable:
Standard Drive Roll wire size:
Separate wire feeder:
No, self contained
Number of Drive rollers:
Max Wire Roll Diameter:
8” (up to 12 lb)
Weight: 28 lb
Preflow time:
Post Flow Time:
Flux Core:
Yes, Optional
Other Features:
Binel/Trafimet 15 series Gun (appearance may vary from depicted)

For use with a generator, make sure that the generator is rated by the generator manufacturer as "clean power", which is less than 5% Total Harmonic Distortion (THD). Use with a generator rated for at least 4800 surge watts for maximum 140A output.

This unit does not come equipped with Flux Core drive rolls. For flux core use, purchase drive roller separately under "MIG Parts"

For Maximum output on 120V, use a delay trip breaker or slow blow fuse rated for 30 amps or tripping of the breaker will occur.
Up to maximum of 3/16" single pass steel/stainless/aluminum
Up to maximum of 3/8" multiple pass steel/stainless/aluminum
Minimum of 24 gauge cabability
Use a spool gun to weld Aluminum.