Power i-MIG 200

200 amp MIG welder with stick capability
Special Price $759.99 Regular Price $799.99
In stock
SKU
POWER I-MIG 200
Power and versatility top the list of features of the Power i-MIG 200. The new digital IGBT inverter design of the i-MIG welder reduces the weight and footprint of the unit making it truly portable. The dual voltage design allows the unit to be used about anywhere a receptacle is present. This unit packs more features than any MIG welder in its class. Dual digital displays feature both volt and amp readouts allowing the operator to make precise and repeatable adjustments to the parameters. The stick function adds an extra dimension of versatility and performance when a MIG welder isn't needed or practical. The Arc force control manages the arc characteristics in both MIG and Stick modes. In MIG mode, it controls current rise time, affecting puddle fluidity, bead contour, and penetration. In stick mode the arc force control behaves as a DIG control function and improves arc performance in short arc situations. Automatic Preflow and Postflow control improves weld quality during stops and starts helping to reduce porosity for high quality results. The new adjustable burn back control reduces trimming required so the wire is at the perfect length for each restart. When you consider all these features and performance, the all new Power i-MIG 200 is among the best you'll find in its class yielding professional level results.
Write Your Own Review
You're reviewing:Power i-MIG 200
Power and versatility top the list of features of the Power i-MIG 200. The new digital IGBT inverter design of the i-MIG welder reduces the weight and footprint of the unit making it truly portable. The dual voltage design allows the unit to be used about anywhere a receptacle is present. This unit packs more features than any MIG welder in its class. Dual digital displays feature both volt and amp readouts allowing the operator to make precise and repeatable adjustments to the parameters. The stick function adds an extra dimension of versatility and performance when a MIG welder isn't needed or practical. The Arc force control manages the arc characteristics in both MIG and Stick modes. In MIG mode, it controls current rise time, affecting puddle fluidity, bead contour, and penetration. In stick mode the arc force control behaves as a DIG control function and improves arc performance in short arc situations. Automatic Preflow and Postflow control improves weld quality during stops and starts helping to reduce porosity for high quality results. The new adjustable burn back control reduces trimming required so the wire is at the perfect length for each restart. When you consider all these features and performance, the all new Power i-MIG 200 is among the best you'll find in its class yielding professional level results.
Digital IGBT Inverter design offers stable, low spatter arc performance
Arc force control (Inductance) adjusts arc characteristics in both MIG and Stick modes
Capable of SMAW (Stick) welding when MIG conditions aren't ideal
Good duty cycle, higher than most competitor's ratings
10 ft (3m) Series 15 MIG gun designed with comfort in mind (Binzel/Trafimet compatable)
Eurostyle quick coupler allows easy aftermarket changeover to other MIG guns
Weld aluminum with optional Spool gun
Heavy duty cast aluminum wire feed assembly with positive gear driven rollers
Flux core capable with special order drive rolls
Over Current and duty cycle features both warning light and weld interrupt
Automatic Preflow and Postflow
Adjustable Burn back control
Truly portable "suitcase" size and light weight
Suitable for use with 5000 W "clean power" generators
Welding cart
Consumable kit
15 ft. MIG Gun cable
Spool gun with 25 ft cable
Type:
Analog IGBT Inverter
Output /Process Type:
MIG, Stick
Voltage/phase:
DUAL VOLTAGE 120/240 1 PHASE
Max Rated MIG Amps:
@120V: 125A
@240V: 200A
Max Rated Stick Amps:
@ 120V: 100A
@ 240V: 160A
MIG Amps/Volts @ Rated Duty Cycle:
@120V
125A/20.3V @ 35% Duty Cycle/40º C
100A/ 19V @ 60% Duty Cycle/40 º C
75A/17.8V @ 100% Duty Cycle/40º C
@240V
200A/24V @ 35% Duty Cycle/40º C
160A/22V @ 60% Duty Cycle/40º C
130A/20.5V @ 100% Duty Cycle/40º C
Stick Amps/Volts @ Rated Duty Cycle:
120V:
100A/24V @ 35% Duty Cycle/ 40º C
80A/23.2V @ 60% Duty Cycle/ 40º C
60A/22.4V @ 100% Duty Cycle/ 40º C
240V:
160A/26.4V @ 35% Duty Cycle/40º C
130A/25.2V @ 60% Duty Cycle/40º C
100A/24V @ 100% Duty Cycle/ 40º C
Max Inrush ( I1MAX ) Amps:
@110V: 33A
@220V: 36A
Maximum Rated (I1EFF ) Input Amps:
@110V: 20A
@220V: 22A
OCV:
60V
MIG Output Range:
@ 120V: 30A-125A/15.5V-20.3V
@ 220V: 25A-200A/15.5V-24V
Stick Output Range:
@120V: 10A-100A/20.4V-24V
@240V: 10A-160A/20.4V-26.4V
Variable MIG Inductance/Stick Arc Force Control:
Yes
Spool Gun Capable:
Yes
Pulse:
No
Standard Drive Roll wire size:
.023”-.030”
Separate wire feeder:
No, self contained
Number of Drive rollers:
2
Max Wire Feed Speed:
600 IPM
Max Wire Roll Diameter:
8” (up to 12 lb)
Weight: 35 lb
Memory:
No
Preflow time:
Automatic
Post Flow Time:
Automatic
Flux Core:
Yes, Optional
Air Carbon Arc:
No
2T/4T /Torch latch/Trigger:
No
Other Features:
Trafimet/Binzel compatable 15 series torch
Use 4" or 8" spools.
Digital Volt and Amp Meter
minimum_maximum
Unit operates on 120V or 240V. Output is reduced on 120V output to 125A.

For generator use, use only with a generator certified by the generator manufacturer as being "clean power", which is less than 5% THD. For 120V use, use a generator capable of 4000 Surge watts. For 240V use operate with only a generator capable of 9000 Surge watts.

This unit is not recommended for use wtih E6010

Weld up to a maximum of 5/8" in a single pass weld
Weld over 1" in multiple pass welds
Weld a minimum of 24 gauge
Stick:

Weld with a Minimum of 1/16" Electrode
Weld with a Maximum of 5/32" Electrode
Maximum electrode diameter is ultimately determined by electrode type and manufacturer recommendations.

Use a spool gun to weld aluminum.