Power i-MIG 275P

275 amp MIG welder with stick capability
Special Price $1,899.05 Regular Price $1,999.00
In stock
Intended for those customers that are interested in a truly versatile MIG or for those interested only in MIG welding Aluminum, the Power i-MIG 275P incorporates many advanced features and capabilities that far exceed most MIG welders in it's class.   Beginning with a serious 50% duty cycle at 275 amps via dual fan cooling, this unit packs an industrial level punch without being overly large or dependent upon an intergrated undercarriage to move it around.  The digitally controlled IGBT component design delivers a stable, low spatter arc with the ability to weld with wire diamters from .023" to .045" with the standard supplied drive rolls.   Added to the same MIG features of Synergic and manual welding modes that you will find on the Power i-MIG 275S, the Power i-MIG 275P features an additional pulse MIG mode.  This single pulse mode is fully adjustable, with adjustments for pulse voltage, pulse time-on and pulse frequency and can be used to weld metals quickly and out of position without overheating them.  If you are new to the idea of MIG pulse, pulse is typically used in areas where the Axial spray process is desired, but due to the heat and inabilty to weld out of position it is prohibited.  A single-pulse MIG varies the voltage of the unit between two preset voltage levels. The other pulse controls control the duration and frequency of the pulse and are adjusted so that the MIG arc transfer transitions to spray, but drops out of spray range and settles to a globular transfer range long enough to cool the puddle, but not transfer any metal.   This pulse mode is typically used for welding on aluminum or stainless where heat issues are problems with traditional spray arc process.  In addition to the pulse mode, the Power i-MIG 275P the unit supports both spool gun and push-pull gun operation for both the hobbyist and the industrial level professional interested in using it for Aluminum welding.  Besides the standard manual mode, with the push-pull or spool gun connected, the user has the choice of pulse and for synergic operation.  For ease of set-up with multiple users or applications, the unit is also able to store up to 9 different programs.  Adjustable burn back, automatic pre/post gas flow, and inductance control also are included so that the user can completely customize and fine tune the MIG's performance.  In addition to the already excellent list of MIG features and performance, the Power i-MIG 275P also has a stick welding mode, which includes a E6010/Cellulose mode, hot star adjustments and arc force control.
Write Your Own Review
You're reviewing:Power i-MIG 275P
Synergic GMAW/SMAW Operation (MIG/Stick)
Industrial duty cycle
Spot and Stitch timers
Burn back control
Heavy Duty Cast aluminum true driven 4 roll feed mechanism
Euro Quick connect series 36 MIG gun (Binzel/Trafimet compatable)
Arc force control useful for fine tuning arc characteristics in MIG and Stick modes
Dual Digital Display allows precise and repeatable setting of welding parameters
Suitcase size, holds a 12" (30-44 lbs) roll of welding wire, or can use an 8" (10-12 lbs) with an adapter.
Digitally Controlled IGBT Inverter with programmable memory
Stick weld features E6010 capability
Dual Fan Cooling
12 ft. (4m) 36 series MIG gun with Euro quick-connect
Workclamp with cable
Stick Electrode Holder
Ar/CO2 Regulator
Spare Contact Tip
Drive Rolls .023"-.045"
Digital/Micro-controlled IGBT Inverter
Output /Process Type:
MIG, Stick
220/240 V 1 PHASE
Max Rated MIG Amps:
Max Rated Stick Amps:
MIG Amps/Volts @ Rated Duty Cycle:
275A/30V @ 50% Duty Cycle/ 40º C
250A/26.5V @ 60% Duty Cycle/ 40º C
195A/25.6V @ 100% Duty Cycle/ 40º C
Stick Amps/Volts @ Rated Duty Cycle:
200A/28V @ 50% Duty Cycle/40º C
180A/27.2V @ 60% Duty Cycle/40º C
140A/25.6V @ 100% Duty Cycle/40º C

Max Inrush ( I1MAX ) Amps:
48.2 V @ 240V
Maximum Rated (I1EFF ) Input Amps:
35A @ 240V
MIG Output Range:
30-275A/ 15.5-30V
Stick Output Range:
Variable MIG Inductance/Stick Arc Force Control:
Spool Gun Capable:
Standard Drive Roll wire size:
Separate wire feeder:
No, self contained
Number of Drive rollers:
Max Wire Feed Speed:
600 IPM
Max Wire Roll Diameter:
12” (full size up to 44lb)
Preflow time:
Post Flow Time:
Flux Core:
Yes, Optional
Air Carbon Arc:
2T/4T /Torch latch/Trigger:
Other Features:
9 Program Memory
Standard and E6010/ Cellulose Stick settings
Spool gun capability
Hot Start Time 0-2 Seconds
Hot Start Intensity 0-100%
MIG Inductance 0-100%
Synergic and Manual MIG modes
Extra Drive Rolls included .023"-.045" Hard Wire
Burn Back Control 0-2 Seconds
Spot Timer 0-15S
Stitch Timer 0-15S