Power i-TIG 201

200 amp Digital TIG / Stick welder
Special Price $664.05 Regular Price $699.00
In stock
SKU
PIT-201
If you are looking for a professional level DC TIG/Stick welder, the Everlast Power i-TIG 201 offers unparalled features in an economical DC welder. The unit is fully featured, offering both high frequency start and lift start capability. When compared to other DC TIG/Stick welders, on the market, the Power i-TIG 201 competes favorably with similar welders in its class such as Invertec and Maxstar models at just a fraction of the cost. This unit, a replacement for the popular Power i-TIG 200, is widely used by professionals in specialty trades where heat control is important, such as gun smithery, or stainless fab shops, because of it's low amp start capability of just 5 amps and pulse feature which precisely controls the heat. The new DC Power i-TIG 201 definitely retains the analog feel of the original Power i-TIG 200. However, because it now incorporates digital control of the parameters, the result is a simplified internal plug and play design which helps to ensure reliability. Yes, the unit still retains all of the features of the Power i TIG 200 so if you are person who likes to have controls that you can eyeball and touch, it is likely to be a perfect fit in your shop.
Write Your Own Review
You're reviewing:Power i-TIG 201
Digital IGBT Inverter design incorporates simple analog look and feel
TIG output of 200A @ 35% Duty Cycle operating on 240V
TIG output of 125A @ 35% Duty Cycle operating on 240V
Dual Voltage capability allows unit to be used with 120V or 240V single phase service
Pulse function with fully adjustable parameters up to 250Hz
Digital display for accurate setting of amps.
Features Lift start and High Frequency modes for DC welding
160A Stick weld function with arc force control can be used with welding electrodes such as E6011, E7018, and E7014 (Not E6010 capable)
35 Series DINSE-style connectors
Consumable Starter Kit (Tungsten not included)
12ft. Everlast 26-Series TIG torch with 35 Series DINSE-style connectors
Work clamp and 10 ft. cable with 35 Series DINSE-style connectors
Stick electrode holder with 10 ft. cable and 35 Series DINSE-style connectors
Argon regulator
Consumable starter pack (Tungsten not included)
240V/120V Adapter
6ft. Input power cable with plug.
IGBT Type:
Individual IGBT
Inverter Type:
Digital/Micro-controlled
Output Type:
DC Stick, DC TIG
Voltage/phase:
DUAL VOLTAGE 120/240 1 PHASE
Max Rated TIG Amps:
200 Amps
Max Rated Stick Amps:
160 Amps
TIG Amps @ Rated Duty Cycle:
120V: 125A/ 15V @ 35% Duty Cycle/40º C
240V: 200A/ 18V @ 35% Duty Cycle/40º C
Stick Amps @ Rated Duty Cycle:
120V: 100A/24V @ 35% Duty Cycle/40º C
240V: 160A/26.4V @ 35% Duty Cycle/40º C
Max Inrush ( I1MAX ) Amps:
120V: 31.2A
240V: 27.5A
Maximum Rated (I1EFF ) Input Amps:
120V: 19A
220V: 17A
OCV:
TIG: 70V
Stick: 70V
TIG Output Range DC:
120V: 5A-125A/10.2V-15V
240V: 5A-200A/10.2V-18V
TIG Output Range AC:
N/A
Stick Ouput Range DC:
120V: 5A-100A/ 20.2V-24V
240V: 5A-160A/ 20.2V-26.4V
Stick Function:
Adjustable Arc Force Control
Stick Hot Start Type:
Auto Adaptive Hot Start
6010/Cellulose Capable:
Limited to 6011
Minimum Amp DC TIG Start:
5A
Minimum Amp AC TIG Start:
N/A
TIG Start Type:
HF/Lift TIG
TIG Start Type:
HF and Lift Start
Memory:
No
Start Amp Range:
Not Adjustable/ Pre-Set
End Amp Range:
Not Adjustable/Pre-Set
Upslope Time:
0-5 Seconds
Down Slope Time:
0-5 Seconds
Preflow time:
0-5 Seconds
Post Flow Time:
0-25 Seconds
TIG Pulse:
Yes
Standard DC Pulse Frequency:
.2-250Hz
Pulse Time On (Duty Cycle):
10-90%
Pulse Amp Range:
5-95%
Remote Control:
2T/4T
Foot Pedal:
Optional
The Power i-TIG 201 is DC output only. It is not recommended for aluminum welding.

Specifications, style and appearance of accessories are subject to change without notice.

Use only a generator certified by its manufacturer as "Clean Power", which is defined as <10% Total Harmonic Distortion. (THD)

Recommended minimum generator size 4000 watts continuous output (120V) or 8500 watts continuous output (240V) for best results.

This unit is not designed to weld with E6010 electrodes.
minimum_maximum
Weld steel to a maximum of 5/16" single pass (240V)
Weld steel to a maximum of 3/16" single pass (120V)
Weld steel to a maximum of 1/2" multi-pass(240V)
Weld steel to a maximum of 3/8" multi-pass (120V)
Weld to a minimum of .007" Steel
Stick

Weld with a maximum of 1/8" diameter electrode
Weld with a minimum of 1/16" diameter electrode