PowerArc 200ST

200 amp Stick / TIG welder
Special Price $379.05 Regular Price $399.00
In stock
SKU
PA-200ST
The all new PowerARC 200ST is built with the true professional in mind. With 200 amps of DC Stick/Lift TIG welding power, the compact IGBT inverter welder cuts no corners on performance or design. The unit features E6010 welding capability via a dedicated connection port on the front panel of the welder for use on pipelines, shipyards, construction sites, portable repair jobs and pressure and container vessels, and any place requiring the use of E6010 and related cellulose-based welding rods. For excellent low spatter arc performance on E7018, E7024, E7014 and even stainless class electrodes the unit features another connector port for all other welding rods. In both the 6010 and standard operating modes, the unit feature auto adaptive Hot Start, and auto regulated arc force control, which gives you the amount of arc control you need in almost any situation. The basic DC Lift TIG capability of this unit also allows the unit to perform well on steel and stainless applications. Although this unit is built for pros who demand the most from their welder, the PowerARC 200ST feels at home, on the farm, or in the hobbiest's garage and features 120V/240V dual voltage operation. Be sure to pick up a gas valve TIG torch and gas regulator if you want to TIG weld with this unit. Check out our 17V series TIG torch and gas regulator located in our accessories section which are ideal for this unit if you need to use the TIG function.
Write Your Own Review
You're reviewing:PowerArc 200ST
Stable, Smooth DC ARC for best Stick/TIG welds
Built-in Lift TIG feature (gas valve torch optional)
Dedicated E6010 connection port for best E6010 and cellulose rod performance
Digital display for precise current setting
Standard 35 Series DINSE style connectors
Auto regulated Arc force control for better arc performance in short arc situations
Auto Adaptive Hot Start for reduced rod sticking
Simple, easy to use features and controls
Stick electrode holder with 10 ft cable and 35 series DINSE-style connector
Work Clamp with cable
120V/240V adapter
Consumable Starter Kit (Tungsten not included)
IGBT Type:
Individual IGBT
Inverter Type:
Analog
Output Type:
DC Stick, DC TIG
Voltage/phase:
DUAL VOLTAGE 120/240 1 PHASE
Max Rated TIG Amps:
120V: 120A
240V: 240A
Max Rated Stick Amps:
120V: 120A
240V: 200A
Stick Amps @ Rated Duty Cycle:
120V:
120A/24.8V @ 35% Duty Cycle/ 40º C
90A/23.6V @ 60% Duty Cycle/ 40º C
70A/22.8V @ 100% Duty Cycle/ 40º C
240V:
200A/28V @ 35% Duty Cycle/ 40º C
160A/26.4V @ 60% Duty Cycle/ 40º C
130A/25.2V @ 100% Duty Cycle/ 40º C
Max Inrush ( I1MAX ) Amps:
@110V: 42.8A
@220V: 40A
Maximum Rated (I1EFF ) Input Amps:
@110V: 25.7A
@220V: 23.7A
OCV:
Stick: 74V
TIG: 74V
Stick Ouput Range DC:
120V: 20A-120A/ 20.8V-24.8V
240V: 20A-200A/ 20.8V-28V
Stick Function:
Auto Adaptive Arc Force Control
Stick Hot Start Type:
Auto Adaptive Hot Start
6010/Cellulose Capable:
Yes
Minimum Amp DC TIG Start:
20 Amps
TIG Start Type:
Lift TIG Only
TIG Start Type:
Lift Start only
Memory:
No
TIG Pulse:
No
Foot Pedal:
None/Not Applicable
1) The PowerARC 200ST comes with the stick torch, and work clamp.

2) The Gas valve TIG torch is optional.

3) This unit does not support a foot pedal.

4) This unit is DC output only and is not designed to weld aluminum in TIG mode.

5) This unit should be used with a clean power generator only. Everlast does not keep an official or approved list of generators. However, the manufacturer of the generator will be able supply this information. This is usually considered to be less than 5% THD. Use a generator rated for 8900 surge watts for 240V, or for 120V operation, 4500 surge watts. Output will be reduced on 120V.
minimum_maximum
Stick:

Minimum 1/16" electrode (120/240V)
Maximum 5/32" -3/16" electrode (240V)
Maximum 1/8" electrode (120V)
(Max electrode size will depend upon type and brand)

TIG:

Minimum .025" Steel/Stainless (No aluminum)[120/240V]
Maximum Single Pass: 1/4" Steel/Stainless (No aluminum) [240V]
Maximum Multi-Pass: 3/8" Steel/Stainless (No aluminum) [240V]
Maximum Single Pass: 3/16" Steel/Stainless (No aluminum) [120V]
Maximum Multi-Pass: 3/8" Steel/Stainless (No aluminum) [120V]
Min/Max TIG is based off of industry standard practice for best quality welds.