PowerTIG 200DV

200 amp AC/DC TIG / Stick welder with pulse
Special Price $1,281.55 Regular Price $1,349.00
In stock
SKU
PT-200DV
As the latest addition to the analog line of inverter TIG welders from Everlast, the PowerTIG 200DV features all of the same dynamic performance of the PowerTIG 200DX, but expands its versatility by adding dual voltage and a digitally controlled IGBT inverter. Able to operate on 120V or 240V single phase 50/60Hz, the unit offers maximum go anywhere performance. The unit is definitely portable, and can be used with any generator that is rated for a sustained 3500 watts (120V) and is certified by the manufacturer as "clean power". If you need a reliable, TIG welder that you can carry with you and make quality welds day-in and day-out, the PowerTIG 200DV is definitely one to consider.
Write Your Own Review
You're reviewing:PowerTIG 200DV
Reliable IGBTs for stable inverter performance
120V/240V Dual Voltage input
Low as 5 Amp start for TIG in DC/ 20 Amp in AC.
Pre flow and Post flow control for maximum shielding gas protection before and after
Color coded controls are easy to identify and understand
Lift start function for use when HF is not desireable
AC cleaning range adjustment of 30-70% offers good control over cleaning/penetration ratio
240V Outlet in rear for optional WC 300 water cooler
Pre flow and Post flow control for gas
Arc force control (DIG) for stick helps to reduce spatter and improve arc performance
Pulse frequency ranges from .5-150 Hz in AC and DC mode
12 ft. Everlast 26 Series TIG torch with 35 series DINSE stle connectors and torch switch for 2T/4T operation
Stick electrode holder with 10 ft. cable and 35 series DINSE style connectors
Work clamp with 10 ft. cable and DINSE style connectors
Foot pedal
Everlast regulator made from billet brass
240/120V Pigtail Adapter
6 ft. Power input cable
Consumable Starter Kit (Tungsten not included)
IGBT Type:
Individual IGBT
Inverter Type:
Digital/Micro-controlled
Output Type:
AC/DC TIG, DC Stick
Voltage/phase:
DUAL VOLTAGE 120/240 1 PHASE
Max Rated TIG Amps:
120V: 125 Amps
240V: 200 Amps
Max Rated Stick Amps:
120V: 100A
240V: 160A
TIG Amps @ Rated Duty Cycle:
120V:
125A/15V @ 60% Duty Cycle/ 40º C
100A/14V @ 100% Duty Cycle/ 40º C
240V:
200A/18V @ 60% Duty Cycle/ 40º C
160A/16.4V @ 100% Duty Cycle/ 40º C

Stick Amps @ Rated Duty Cycle:
120V:
100A/24V @ 35% Duty Cycle/ 40º C
80A/23.2V @ 60% Duty Cycle/ 40º C
60A/ 22.4V @ 100% Duty Cycle/ 40º C
240V:
160A/26.4V @ 35% Duty Cycle/ 40º C
130A/25.2V @ 60% Duty Cycle/ 40º C
100A/24V @ 100% Duty Cycle/ 40º C
Max Inrush ( I1MAX ) Amps:
120V: 35A
240V: 31A
Maximum Rated (I1EFF ) Input Amps:
120V: 24A
240V: 23A
OCV:
TIG: 90V
Stick: 90V
TIG Output Range DC:
120V: 5A-125A/10.2V-15V
240V: 5A-200A/10.2V-18V
TIG Output Range AC:
120V: 20A-125A/ 10.8V-15V
240V: 20A-200A/10.8V-18V
Stick Ouput Range DC:
120V: 5A-100A/ 20.2V-24V
240V: 5A-160A/20.2V-26.4V
Stick Function:
Adjustable Arc Force Control
Stick Hot Start Type:
Auto Adaptive Hot Start
6010/Cellulose Capable:
Limited to 6011
Minimum Amp DC TIG Start:
5A
Minimum Amp AC TIG Start:
20A
TIG Start Type:
HF
Lift TIG
TIG Start Type:
HF and Lift Start
Memory:
No
End Amp Range:
Fixed Minimum
Upslope Time:
Fixed, Minimum
Down Slope Time:
0-25 Seconds
Preflow time:
0-10 Seconds
Post Flow Time:
0-25 Seconds
TIG Pulse:
Yes
Standard DC Pulse Frequency:
.5-150Hz
Standard AC Pulse Frequency:
.5-150Hz
Pulse Time On (Duty Cycle):
10-90%
Pulse Amp Range:
5-95% of welding amps
AC Frequency (Hz):
20-250Hz
AC Balance Range:
30-70% of Electrode Positive
AC Wave Forms:
Advanced Square Wave
Remote Control:
2T/4T
Foot Pedal:
Standard
240/120V adapter is included. Use only with generators certified by the manufacturer as "clean power".
minimum_maximum
TIG:

Weld steel to a maximum of 5/16" single pass (240V)
Weld steel to a maximum of 3/16" single pass (120V)
Weld steel to a maximum of 1/2" multi-pass(240V)
Weld steel to a maximum of 3/8" multi-pass (120V)
Weld aluminum to a maximum of 1/4" single pass (240V)
Weld aluminum to a maximum of 1/8" single pass (120V)
Weld aluminum to a maximum of 3/8" multi-pass (240V)
Weld aluminum to a maximum of 1/4" multi-pass (120V)
Weld to a minimum of .007" Steel
Weld to a minimum of .020" Aluminum
Stick:

Weld with a minimum of 1/16" diameter electrode
Weld with a maximum of 1/8" diameter electrode (240V)
Weld with maximum of 3/32"-1/8" diameter electrode (120V)
TIG limits are recommended based off of practical limits and industry recommended standards for single and multi-pass welds.

Stick min/mas recommendations are general and may vary between manufacturers and electrode types.