PowerTIG 315LX

315 amp TIG / Stick welder
$1,999.99
In stock
SKU
PT-315LX
Write Your Own Review
You're reviewing:PowerTIG 315LX
IGBT Power Modules increase reliability and arc performance
Analog Input, Digital Control
10 amp DC and 20 amp AC minimum amp starts
2T/4T up and downslope operation for welding with torch switch
Pre flow and Post flow control of maximum shielding gas protection before and after the weld
HF or Lift TIG start with improved HF start circuit
Expanded AC frequency range up to 500 Hz
Pulse up to 750 Hz for maximum arc and heat control
Heavy duty design and construction that retains portability in industrial situations
12 ft. Everlast 18 Series TIG torch with 35 series DINSE style connectors and torch switch for 2T/4T operation
Stick electrode holder with 10 ft. cable and 35 series DINSE style connectors
Work clamp with 10 ft. cable and DINSE style connectors
Foot pedal
Everlast regulator made from billet brass
Consumable starter kit
6 ft Power input cable
IGBT Type:
Module IGBT
Inverter Type:
Digital/Micro-controlled
Output Type:
AC/DC TIG, DC Stick
Voltage/phase:
220/240 V 1 PHASE
Max Rated TIG Amps:
315A
Max Rated Stick Amps:
250A
TIG Amps @ Rated Duty Cycle:
315A/22.6V @ 60% Duty Cycle/ 40º C
250A/20V @ 100% Duty Cycle/ 40º C
Stick Amps @ Rated Duty Cycle:
250A/30V @ 35% Duty Cycle/ 40º C
200A/28V @ 60% Duty Cycle/ 40º C
160A/26.4V @ 100% Duty Cycle/ 40º C
Max Inrush ( I1MAX ) Amps:
220V: 58A
230V: 55.5A
240V: 53A
Maximum Rated (I1EFF ) Input Amps:
220V:35A
230V: 33A
240V: 31A
OCV:
TIG: 70V
Stick: 70V
TIG Output Range DC:
10A-315A/10.4V-22.6V
TIG Output Range AC:
20A-315A/10.4V-22.6V
Stick Ouput Range DC:
20A-250A/20.8V-30V
Stick Function:
Adjustable Arc Force Control
Stick Hot Start Type:
Auto Adaptive Hot Start
6010/Cellulose Capable:
Limited to 6011
Minimum Amp DC TIG Start:
10A
Minimum Amp AC TIG Start:
20A
TIG Start Type:
HF
Lift TIG
TIG Start Type:
HF and Lift Start
Memory:
No
Upslope Time:
0-15 Seconds
Down Slope Time:
0-30 Seconds
Preflow time:
0-10 Seconds
Post Flow Time:
0-30 Seconds
TIG Pulse:
Yes
Standard DC Pulse Frequency:
.2-750Hz
Standard AC Pulse Frequency:
.5-750Hz
Pulse Time On (Duty Cycle):
10-90%
Pulse Amp Range:
10-315A
AC Frequency (Hz):
20-500Hz
AC Balance Range:
10-90%
AC Wave Forms:
Advanced Square Wave
Remote Control:
2T/4T
Foot Pedal:
Standard
n/a
minimum_maximum
TIG:

Weld steel to a maximum of 5/8" single pass
Weld steel to a maximum of 1+" multi-pass
Weld aluminum to a maximum of 5/8" single pass
Weld aluminum to a maximum of 1+" multi-pass
Weld to a minimum of .013" Steel
Weld to a minimum of .023" Aluminum
Stick:

Weld with a minimum of 1/16" diameter electrode
Weld with a maximum of 1/4" diameter electrode